7700 MultiFrame Manual
7710XUC-HD HD Format Up/Down/Cross Converter
The off (open) position is up, or farthest from the printed circuit board. There is also a toggle switch and
pushbutton which are used to navigate the on screen menu (see section 0).
5.1.
SETTING THE OUTPUT VIDEO FRAME RATE
DIP switches 6 and 7 are used to set the frame rate frequency of operation.
When DIP switches 6 and 7 are both off, the frame rate and video standard can be set
by either the menu system or VistaLINK™ only (i.e.: they cannot be set by the DIP
switches). The other two settings of DIP switches 6 and 7 allow setting of the frame
rate and video standard manually using the DIP switches only (i.e.: they cannot be set by
the menu system or VistaLINK™).
7710XUC-HD
-14
Off
On
1
2
DIP Switch
Function
1
2
3
Output Video Standard
4
5
6
Frame Rate Selection
7
8
Unused
Table 6: Overview of DIP Switch Functions
DIP 6
DIP 7
Off
Off
On
Off
Off
On
Table 7: Frame Rate Divisor DIP Switch Settings
Revision 1.0
3
4
5
6
7
8
FRAME RATES
Set by Menu or VistaLINK™
59.94/29.97/23.98
50/25