Table of Contents
Advertisement
OPERATION
Model 8950-SID Digital Source ID Decoder Manual
When not in either the Setup mode or the VITC window select
mode, the arrow keys are used to position all the character
windows on the screen. (See also section 3.5.2.) SHIFT +
arrow keys are used to provide fine adjustment of the character
generator raster.
3.1.2. The Character Window-Button Group
CHAR GEN WINDOW
highlights the selected window. Use the arrow keys to move the
window, use the CHAR GEN ON/OFF key to turn the window on
or off.
Press the MODE key again to select the next VITC
window.
normal VITC display mode.
CHAR GEN ON/OFF Turns the character generator ON and OFF. When
in the VITC window select mode the CHAR GEN ON/OFF key is
used to turn individual windows ON and OFF.
3.1.3. The Display-Button
DISPLAY Selects what data is being displayed on the front panel. Each
time it is pressed it cycles to the next display data.
When VITC Source ID is being displayed
Description
VTR Timecode
Source ID Message
VTR Status
When Neilson Source ID is being displayed
Description
Source name with Source ID CODE
Uplink name and destination name
Contact Information
Source Location
Time and Source ID code
Date, Test bit and Source ID code
3.1.4. An Overview of the SHIFT Key functions
When the SHIFT key is held down, the meanings of some of the keys are
modified, gaining quick access to a wider variety of functions. Following is
a summary of the shifted key functions
Revision 1.0
Initiates VITC window select mode and
Press the MODE key a third time to return to the
Example
TIME 12:45:30:00
ID:
VTR-10
STATUS: STOP
Example
NBC NYC CH1 033
WNBC-P
NBCNY
212 664 7442
040:45
073:58
12:40:00 PM 255
01/20
T=0
255
Page 3-2
Advertisement
Table of Contents
