Danfoss VLT ISD 511 Operating Manual page 11

VLT® Servo Drive System ISD 511
Operating Guide
10.6.2 Feed-In Cable Replacement
10.6.2.1 Disconnecting the Feed-In Cable
10.6.2.2 Replacing the Feed-In Cable
10.6.2.3 Connecting the Feed-In Cable
10.6.3 Loop Cable Replacement
10.6.3.1 Disconnecting the Loop Cable
10.6.3.2 Replacing the Loop Cable
10.6.3.3 Connecting the Loop Cable
10.7 Fuse Replacement in Decentral Access Module (DAM 510)
10.8 Fan Replacement
10.9 Product Returns
10.10 Recycling
10.11 Disposal
11 Specifications
11.1 Nameplates
11.1.1 Nameplates on ISD 511 Servo Drive
11.1.2 Nameplates on the System Modules
11.2 Characteristic Data
11.2.1 Characteristic Data for ISD 511 Servo Drive
11.2.2 Characteristic Data for Power Supply Module (PSM 510)
11.2.3 Characteristic Data for Decentral Access Module (DAM 510)
11.2.4 Characteristic Data for Auxiliary Capacitors Module (ACM 510)
11.2.5 Characteristic Data for Expansion Module (EXM 510)
11.3 Dimensions
11.3.1 Dimensions of ISD 511 Servo Drive
11.3.2 Dimensions of Flange Screw for Mounting the ISD 511 Servo Drive
11.3.3 Dimensions of Power Supply Module (PSM 510)
11.3.4 Dimensions of Decentral Access Module (DAM 510)
11.3.5 Dimensions of Auxiliary Capacitors Module (ACM 510)
11.3.6 Dimensions of Expansion Module (EXM 510)
11.4 Motor Overload and Overtemperature Protection
11.5 Allowed Forces on the ISD 511 Servo Drive
11.6 Connectors on the System Modules
11.6.1 Backlink Connector
11.6.2 Brake Connectors
11.6.2.1 Brake Resistor Connector on PSM 510
11.6.3 Ethernet Connectors
Danfoss A/S © 2023.08
Contents
AQ377148425069en-000101/130R1213 | 11
121
121
122
122
122
122
122
122
123
124
124
124
124
125
125
125
126
128
128
129
130
130
131
131
131
132
132
132
133
134
135
135
135
135
137
137
137