Danfoss VLT ISD 511 Operating Manual page 106

VLT® Servo Drive System ISD 511
Operating Guide
Table 50: UAUX charging error (0x3297 / 0x154)
Code PROFINET Name
®
code
0x3297 0x154 U
error
9.4.25 DC link shutdown error (0x3298 / 0x165)
This error is valid for DAM 510.
Table 51: DC link shutdown error (0x3298 / 0x165)
Code PROFINET code
®
0x3298 0x165
9.4.26 UAUX shutdown error (0x3299 / 0x155)
This error is valid for DAM 510.
Table 52: UAUX shutdown error (0x3299 / 0x155)
Code PROFINET code
®
0x3299 0x155
9.4.27 UAUX undervoltage hardware (0x329A / 0x156)
This error is valid for PSM 510, DAM 510, and ACM 510.
Table 53: UAUX undervoltage hardware (0x329A / 0x156)
Code PROFINET
®
code
0x329A 0x156
9.4.28 Automated fault reset failure (0x329B / 0x168)
This error is valid for PSM 510, DAM 510, and ACM 510.
Table 54: Automated fault reset failure (0x329B / 0x168)
Code PROFINET
®
code
0x329B 0x168
9.4.29 Device overtemperature (0x4210 / 0x157)
This error is valid for PSM 510, DAM 510, ACM 510, and ISD 511.
106 | Danfoss A/S © 2023.08
Severity (warning/
error/trip lock)
charging Error
AUX
Name Severity (warning/error/
trip lock)
DC link shutdown Error
error
Name Severity (warning/error/
trip lock)
U shutdown Error
AUX
error
Name Severity (warning/
error/trip lock)
U undervoltage Error
AUX
hardware
Name Severity (warning/
error/trip lock)
Automated fault re- Trip lock
set failure
Description
Load error when U is charging. The maxi-
AUX
mum time limit to charge the AUX line has
been exceeded.
Description
Error when UDC is in shut-
down phase.
Description
Error when U is in shut-
AUX
down phase.
Description
U undervoltage detected by
AUX
hardware circuit.
Description
Too many auto fault resets have been
executed in intended time interval.
AQ377148425069en-000101 / 130R1213
Diagnostics
LCP name
UAUX charg
err
LCP name
UDC shutdwn err
LCP name
UAUX shtdwn
err
LCP name
AUX undervol
HW
LCP name
autoreset fail