Troubleshooting - Technogym BIKE EXC 700 LED Manual

16 Troubleshooting

Below.is.a.list.of.problems.that.may.arise.during.normal.use.of.the.equipment..If.
the.described.remedies.do.not.solve.the.problem,.contact.the.Technical.Support.
Service..
Problem
Equipment
doesn't switch on
Too noisy
16 t
roubleshootIng
Cause
Remedy
Mains power failure.
Check.the.power.supply.at.the.wall.socket.used.by.the.
equipment.by.plugging.in.an.appliance.that.definitely.
works.
Power supply cable damaged.
Contact.the.Technogym.Technical.Support.Service.
Power supply cable not plugged into the
equipment.
Check.the.connection.
Fuses blown.
To.replace.the.blown.fuse.with.a.spare.(3.15A.(F).contact.
Technogym.Technical.Support.Service.
The control panel connector has been accidentally
disconnected.
Contact.the.Technogym.Technical.Support.Service.
Equipment not properly levelled.
Check.the.position.and.level.the.adjustment.feet.
Damaged bearings.
Contact.the.Technogym.Technical.Support.Service.
Worn belt.
Contact.the.Technogym.Technical.Support.Service.
27