Load Sample And Record Data; Before Running Samples - Beckman Coulter CytoFLEX SRT Instructions For Use Manual

Load Sample and Record Data

Before Running Samples

CAUTION
Risk of erroneous results if the Sorter has been idle for an extended period of time.
Perform a prime if the system has been idle for an extended period of time. Refer
to Performing the Flow Cell De-bubble
Procedures.
1
Run the
2
Run the
3
Create an experiment. Refer to
4
Run Sort Calibration. Refer to
5
Ensure that there is sufficient space on your hard drive for sample processing and data
acquisition.
6
Verify the detector configuration. Refer to
Configuration.
C37808AC
System Startup Program
Instrument Quality Control and Standardization
Creating an
Sort Calibration (Auto Drop
in CHAPTER 11, Replacement/Adjustment
procedure.
procedure.
Experiment.
Delay).
Verifying, Selecting, Editing, and Creating Detector
Sorting
Load Sample and Record Data
5-55
5