Load Sample And Record Data; Before Running Samples - Beckman Coulter CytoFLEX Instructions For Use Manual

Load Sample and Record Data

Before Running Samples

CAUTION
Risk of erroneous results if the Cytometer has been idle for an extended period of
time. Perform a prime if the system has been idle for an extended period of time
(see Priming the Flow Cell
1
Run the
2
Run the
3
Create an experiment. Refer to
4
Verify mixer settings. Refer to
Replacement/Adjustment
5
Ensure that there is sufficient space on your hard drive for sample processing and data
acquisition.
6
Verify the detector configuration. Refer to
Configuration.
7
Verify the laser settings. Refer to
Analysis.
B49006AS
in CHAPTER 12, Replacement/Adjustment
Daily Startup procedure.
Instrument Quality Control and Standardization
Creating an
Changing Sample Mixing and Backflush Settings
Procedures.
procedure.
Experiment.
Verifying, Selecting, Editing, and Creating Detector
Laser Settings in CHAPTER 6, Data Acquisition and Sample
Data Acquisition and Sample Analysis
Load Sample and Record Data
Procedures.)
in CHAPTER 12,
6
6-47