L2Protocol Tunnel Dot1Q - H3C IE4300 Command Reference Manual

LACP
LLDP
MVRP
PAGP
PVST
STP
Tunnel
VTP
UDLD
DTP
CFD
Table 1 Command output
Field
Protocol
Encapsulated
Decapsulated
Forwarded
Dropped

l2protocol tunnel dot1q

Use
l2protocol tunnel dot1q
Use
undo l2protocol tunnel dot1q
Syntax
In Layer 2 Ethernet interface view:
l2protocol { cdp | cfd | dldp | dtp | eoam | gvrp | lacp | lldp | mvrp | pagp |
pvst | stp | udld | vtp } tunnel dot1q
undo l2protocol { cdp | cfd | dldp | dtp | eoam | gvrp | lacp | lldp | mvrp | pagp
| pvst | stp | udld | vtp } tunnel dot1q
In Layer 2 aggregate interface view:
0 0
3 3
0 0
5 1
0 0
5 5
N/A N/A
0 6
0 0
0 0
0 0
Description
The DTP and CFD protocols.
Number of encapsulated packets.
The number increases by 1 when the interface receives and encapsulates a
protocol packet from a customer network.
For protocol Tunnel, which represents tunneled packets, this field displays N/A.
Number of decapsulated packets.
The number increases by 1 when the interface receives and decapsulates a
tunneled packet from the service provider network.
For protocol Tunnel, which represents tunneled packets, this field displays N/A.
Number of forwarded packets.
The number increases by 1 when the interface receives a protocol packet and
forwards it.
The number increases by 1 for protocol Tunnel when the interface receives a
tunneled packet and forwards it. If no interface of the PE is connected to customer
networks, the number does not increase.
Number of dropped packets.
The number increases by 1 when the interface receives a protocol packet and
drops it. Protocol packets dropped by hardware are not counted.
The number increases by 1 for protocol Tunnel when the interface receives a
tunneled packet and drops it.
0
3
0
7
0
5
100
0
0
0
0
to enable L2PT for a protocol.
to disable L2PT for a protocol.
2
0
3
0
3
0
0
10
0
0
0
0