Pppoe Relay Commands; Display Pppoe-Relay Client-Information - H3C IE4300 Command Reference Manual

PPPoE relay commands

PPPoE relay commands

display pppoe-relay client-information

Use
display pppoe-relay client-information
processing configuration for client-side packets on the PPPoE relay.
Syntax
display pppoe-relay client-information { format | strategy }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
: Displays the format configuration for the vendor-specific tag processing for client-side
format
packets on the PPPoE relay.
strategy
packets on the PPPoE relay.
Examples
# Display the format configuration for the vendor-specific tag processing for client-side packets on
the PPPoE relay.
<Sysname> display pppoe-relay client-information format
The current client-information format:
Circuit ID: ASCII
Remote ID: ASCII
# Display the policy configuration for the vendor-specific tag processing for client-side packets on the
PPPoE relay.
<Sysname> display pppoe-relay client-information strategy
The current global client-information strategy: Replace
The current interface client-information strategy:
Interface
GigabitEthernet1/0/1
GigabitEthernet1/0/2
Table 1 Command output
Field
The current client-information
format
The current global
: Displays the policy configuration for the vendor-specific tag processing for client-side
Description
Circuit ID and remote ID padding formats in the vendor-specific tag:
•
•
•
Global vendor-specific tag processing policy for the client-side PADI and
Strategy
Keep
Drop
ASCII—ASCII string padding format.
Hex—Hexadecimal padding format.
User-defined—User-defined padding format.
1
to display the vendor-specific tag