Display Mvrp Statistics - H3C IE4300 Command Reference Manual

Syntax
display mvrp state interface interface-type interface-number vlan vlan-id
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number
vlan vlan-id
Examples
# Display the MVRP state of GigabitEthernet 1/0/1 in VLAN 2.
<Sysname> display mvrp state interface gigabitethernet 1/0/1 vlan 2
MVRP state of VLAN 2 on port GE1/0/1:
Port
------------------------ ------ ----------- -----------
GE1/0/1
Table 2 Command output
Field
MVRP state of VLAN 2
on port GE1/0/1
App-state
Reg-state

display mvrp statistics

Use display mvrp statistics
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
VLAN
2
Description
MVRP state of GigabitEthernet 1/0/1 in VLAN 2.
State of the attribute that the local participant declares to its peer participant:
•
VO—Very anxious observer.
•
VP—Very anxious passive.
•
VN—Very anxious new.
•
AN—Anxious new.
•
AA—Anxious active.
•
QA—Quiet active.
•
LA—Leaving active.
•
AO—Anxious observer.
•
QO—Quiet observer.
•
AP—Anxious passive.
•
QP—Quiet passive.
•
LO—Leaving observer.
Registration state of the attribute declared by the peer participant on the local
participant:
•
IN—The attribute is registered.
•
LV—The attribute is previously registered, but now it is being deregistered.
•
MT—The attribute is not registered.
to display MVRP statistics.
: Specifies a port by its type and number.
App-state Reg-state
VP IN
3