The
port private-vlan host
trunk promiscuous
Examples
In this example, VLAN 20 is a secondary VLAN and is associated with primary VLAN 2.
# Configure GigabitEthernet 1/0/1 as a host port, and then verify the configuration.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port private-vlan host
[Sysname-GigabitEthernet1/0/1] display this
#
interface GigabitEthernet1/0/1
port link-mode bridge
port private-vlan host
#
return
The output show that GigabitEthernet 1/0/1 is operating in bridge mode and is a host port.
# Assign GigabitEthernet 1/0/1 to VLAN 20, and then verify the configuration.
[Sysname-GigabitEthernet1/0/1] port access vlan 20
[Sysname-GigabitEthernet1/0/1] display this
#
interface GigabitEthernet1/0/1
port link-mode bridge
port private-vlan host
port link-type hybrid
undo port hybrid vlan 1
port hybrid vlan 2 20 untagged
port hybrid pvid vlan 20
#
return
The output shows that:
•
GigabitEthernet 1/0/1 is an untagged member of secondary VLAN 20 and primary VLAN 2.
•
The port link type of GigabitEthernet 1/0/1 is hybrid and its PVID is VLAN 20.
Related commands
port private-vlan promiscuous
port private-vlan trunk promiscuous
port private-vlan trunk secondary
private-vlan
private-vlan primary
port private-vlan promiscuous
Use
port private-vlan promiscuous
specified VLAN and assign the port to the VLAN.
Use
undo port private-vlan
command is mutually exclusive with the
and
port private-vlan trunk secondary
(VLAN view)
to restore the default.
to configure a port as a promiscuous port of the
39
port private-vlan
commands.