Pppoe-Relay Server-Information Vendor-Specific Strip; Pppoe-Relay Trust - H3C IE4300 Command Reference Manual

pppoe-relay server-information vendor-specific strip

Use
pppoe-relay server-information vendor-specific strip
to strip the vendor-specific tags of the PPPoE server-side packets.
Use
undo pppoe-relay server-information vendor-specific strip
interface from stripping the vendor-specific tags of the PPPoE server-side packets.
Syntax
pppoe-relay server-information vendor-specific strip
undo pppoe-relay server-information vendor-specific strip
Default
The function of stripping vendor-specific tags of the PPPoE server-side packets is disabled on an
interface.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
When the PPPoE relay receives PADO and PADS packets from the PPPoE server on a PPPoE relay
trusted port with this feature enabled, the PPPoE relay strips the vendor-specific tags of the packets
before forwarding the packets.
This command takes effect only on packets received on PPPoE relay trusted ports.
This command is not supported on Layer 2 aggregation group member ports. If a Layer 2 Ethernet
interface is configured with this command before joining a Layer 2 aggregation group, the command
is cleared on the member port after the member ports joins the aggregation group.
Examples
# Enable GigabitEthernet 1/0/1 to strip the vendor-specific tags of the PPPoE server-side packets..
<Sysname> system-view
[ ]
Sysname
[
Sysname-GigabitEthernet1/0/1
[
Sysname-GigabitEthernet1/0/1
Related commands

pppoe-relay trust

pppoe-relay trust
Use
pppoe-relay trust
Use
undo pppoe-relay trust
Syntax
pppoe-relay trust
undo pppoe-relay trust
interface GigabitEthernet 1/0/1
to configure an interface as PPPoE relay trusted port.
]
pppoe-relay trust
]
pppoe-relay server-information vendor-specific strip
to restore the default.
7
to enable an interface
to disable an