Processor (Cpu); Installation - NEC E120e-M User Manual

Chapter 2 Preparations
1.6

Processor (CPU)

You can configure the multi-processor system by adding an optional processor.

1.6.1 Installation

Follow steps below to install the processor.
1. Refer to steps 1 to 3 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Locate the CPU socket to which you are going to install a processor.
3. Remove the protective cover from the CPU socket.
4. Push down the socket lever once to unlatch it from the hook, then slowly open the lever until it stops.
5. Lift the plate.
• You must avoid static electricity to work with the procedure below. For details,
Important
refer to Chapter 2 (1.2 Anti-static Measures).
Make sure to use the processor authorized by NEC. Installing a third-party
•
processor may cause a failure of the processor as well as the motherboard.
Repair of the server due to failures or damage resulted from installing such a
processor will be charged.
When a processor is additionally installed, Windows may log the system event on System
Tips
Viewer, however, it is no problem for operation.
Note Keep the removed protective cover for future use.
Important Do not touch the socket contacts.
Express5800/E120e-M User's Guide
1. Installing Internal Optional Devices
49