Manufacturing Number; Figure 2: Marking Area For Serial Numbers - WAGO I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-354/000-001 EtherCAT® Fieldbus Coupler, ID Switch
3.1

Manufacturing Number

The serial number indicates the delivery status directly after production. This
number is part of the labeling on the side of each component.

Figure 2: Marking Area for Serial Numbers

There are two serial numbers in two rows in the side marking. They are left of the
release tab. The first 10 positions in the longer row of the serial numbers contain
version and date identifications.
Example structure of the rows: 0114010101...
01
WW
Calendar
week
The row order can vary depending on the production year, only the longer row is
relevant. The back part of this and the shorter row contain internal administration
information from the manufacturer.
In addition, the serial number is printed on the front of the fieldbus
coupler/controller on the cover cap of the service interface, so that it can also be
read when installed.
14 01
YY FW --
Year Firmware Hardware
version
01 01
HW FL
Firmware
version loader
version
System Description
(additional positions)
-
Internal information
Manual
Version 1.2.1
19