Manufacturing Number; Figure 2: Marking Area For Serial Numbers - WAGO 750 XTR Manual

20 System Description
3.2

Manufacturing Number

The serial number indicates the delivery status directly after production. This
number is part of the labeling on the side of each component.

Figure 2: Marking Area for Serial Numbers

There are two serial numbers in two rows in the side marking. They are left of the
release tab. The first 10 positions in the longer row of the serial numbers contain
version and date identifications.
Example structure of the rows: 0114010101...
01
WW
Calendar
week
The row order can vary depending on the production year, only the longer row is
relevant. The back part of this and the shorter row contain internal administration
information from the manufacturer.
In addition, the serial number is printed on the front on the cover cap of the
service interface, so that it can also be read when installed.
Manual
Version 1.3.0
14 01
YY FW --
Year Firmware Hardware
version
WAGO I/O System 750 XTR
750-xxxx/040-xxx System Manual XTR
01 01
HW FL
Firmware
version loader
version
(additional positions)
-
Internal information