Fuel Flow Actuator Inspection (Type 2); Fuel Flow Actuator Removal And Installation (Type 2) - Suzuki Grand Vitara 2011 Manual

7) Connect fuel flow actuator connector (1).
8) Connect fuel feed hose (2) and fuel return hose (3)
to injection pump.
[A]: Type 2
9) Install new high pressure pipe referring to "High
Pressure Pipe Removal and Installation: For Diesel
Engine Model".
10) Install timing belt referring to "Timing Belt and Belt
Tensioner Removal and Installation: For F9Q Engine
in Section 1D".
11) Check fuel leakage referring to "Fuel Leakage Check
Procedure: For Diesel Engine Model".
12) Check DTC referring to "DTC Check: For Diesel
Engine Model in Section 1A".
I6JB0A172011-01
[B]: Type 3
Fuel System: For Diesel Engine Model 1G-44

Fuel Flow Actuator Inspection (Type 2)

Check resistance between terminals of fuel flow
actuator.
If resistance is out of specification, replace fuel flow
actuator referring to "Fuel Flow Actuator Removal and
Installation (Type 2): For Diesel Engine Model".
Fuel flow actuator resistance
2.9 – 3.1 Ω at 20 °C (68 °F)
Fuel Flow Actuator Removal and Installation
(Type 2)
WARNING
!
Before servicing fuel system, be sure to
observe "Precautions on Fuel System
Service: For Diesel Engine Model".
CAUTION
!
• Do not reuse fuel flow actuator and fuel
flow actuator bolt because it has the
possibility that fuel leaks.
• Never leave fuel flow actuator orifice open.
Replace new fuel flow actuator at once in
order to prevent fuel circuit from
contamination.
S6JB0A1726033
I5JB0B170029-01
S6JB0A1726032