Suzuki Grand Vitara 2011 Manual page 1411

4. Gear shift lever case assembly
: Apply sealant 99000-31110 to mating
surface of gear shift lever case assembly
and rear case.
5. Adapter case oil seal
: Apply grease 99000-25010 to oil seal lip.
6. Adapter case No.1 bolt
7. Adapter case No.2 bolt
8. Gear shift lever case bolt
9. Select return bolt
: Apply sealant 99000-31110 to all around
thread part of bolt
10. Select return low speed spring (short)
11. Select return 5th & reverse spring (long)
12. Select guide pin
13. Oil gutter
14. Rear bearing plate
15. Rear bearing plate bolt
16. Pin
17. Gear shift & select lever assembly
18. Reverse shift limit cam
Manual Transmission/Transaxle: For Diesel Engine Model 5B-42
22. Reverse idle gear needle bearing
23. Reverse idle gear
24. Reverse idle gear case
: Apply sealant 99000-31110 to mating
surface of reverse idle gear case and rear
case.
25. Reverse idle gear shaft
26. Back up light switch
27. Washer
28. Back up light switch pin
: Apply grease 99000-25010 to end of pin.
29. Oil level/filler plug
30. Oil drain plug
31. Transmission front case bolt
32. Input shaft bearing retainer
: Apply sealant 99000-31110 to mating
surface of input shaft bearing retainer and
front case.
33. Input shaft bearing retainer bolt
34. Transmission to engine bolt
35. Transmission to engine nut
36. Input shaft, main shaft & countershaft
assembly
40. High speed gear shift yoke
41. Low speed gear shift yoke
42. Input shaft bearing retainer oil
seal
: Apply grease 99000-25010 to oil
seal lip.
: 54 N⋅m (5.4 kgf-m, 39.0 lb-ft)
: 45 N⋅m (4.5 kgf-m, 32.5 lb-ft)
: 22 N⋅m (2.2 kgf-m, 16.0 lb-ft)
: 25 N⋅m (2.5 kgf-m, 18.0 lb-ft)
: 26 N⋅m (2.6 kgf-m, 19.0 lb-ft)
: 23 N⋅m (2.3 kgf-m, 17.0 lb-ft)
: 55 N⋅m (5.5 kgf-m, 40.0 lb-ft)
: 35 N⋅m (3.5 kgf-m, 25.5 lb-ft)
: 39 N⋅m (3.9 kgf-m, 28.5 lb-ft)
: Do not reuse.
: Apply transmission oil.