Valves And Cylinder Head Components - Suzuki Grand Vitara 2011 Manual

Valves and Cylinder Head Components

1. Cylinder block
2. Cylinder head
3. Cylinder head gasket
: Identification number provided on gasket comes
to crankshaft pully side, facing up.
4. Intake valve
5. Exhaust valve
6. Valve spring seat
7. Valve stem seal
8. Valve spring
9. Valve spring retainer
10. Valve cotter
11. Valve guide
12. Cylinder head bolt (M10)
Engine Mechanical: For J20 Engine 1D-99
13. Cylinder head bolt (M6)
: Be sure to tighten cylinder head bolt (M8) after securing
cylinder head bolt (M10).
14. Knock pin
: Tighten 52 N⋅m (5.2 kgf-m, 38.0 lb-ft), 82 N⋅m (8.2 kgf-m, 59.5
lb-ft), 0 N⋅m (0 kgf-m, 0 lb-ft), 52 N⋅m (5.2 kgf-m, 38.0 lb-ft)
and 103 N⋅m (10.3 kgf-m, 74.5 lb-ft) by the specified
procedure.
: 11 N⋅m (1.1 kgf-m, 8.0 lb-ft)
: Do not reuse.
: Apply engine oil to sliding surface of each part.
S6JB0A1426024
I5JB0A142039-01