Suzuki Grand Vitara 2011 Manual page 896

2C-3 Rear Suspension:
Lower arm adjustment
1) Loosen right and left lower arm mount nuts (1).
1
1
2) Adjust toe and camber to satisfy the specification by
turning right and left lower arm inner bolts (cam
bolts) (1) with same amount.
NOTE
When bolt is turned a-direction, camber
becomes "+" and toe becomes "OUT". When
bolt is turned b-direction, camber becomes
"–" and toe becomes "IN".
[A]
a b
1
2
[A]: Left side
[B]: Right side
I5JB0A230004-01
[B]
a
b
1
2
I5JB0A230005-01
2. Lower arm
3) After adjustment, tighten right and left nuts to
specified torque while holding cam bolt with another
wrench to prevent it from turning.
Tightening torque
Lower arm mount nut: 135 N·m (13.5 kgf-m, 98.0
lb-ft)
Reference Information
Side slip
When checked with side slip tester, side slip should
satisfy following specification.
Side slip
IN 7.5 mm/m (IN 0.2953 in/3.3 ft)
If side slip is greatly different, toe and/or camber
may be correct.