Valve Body Assembly Components; Automatic Transmission Unit Assembly - Suzuki Grand Vitara 2011 Manual

Valve Body Assembly Components

5
1
1. Manual valve
2. TCC control solenoid valve
3. Pressure control solenoid valve
4. Detent spring

Automatic Transmission Unit Assembly

CAUTION
!
When replacing pressure control solenoid
valve and/or TCC pressure control solenoid
valve, it is strictly required to replace it
together with valve body assembly as a set.
Replacing pressure control solenoid valve
and/or TCC pressure control solenoid valve
independently may cause excessive shift
shock.
(a)
12
(a)
11
6
4
8
5. Plate
6. Shift solenoid valve A
7. Shift solenoid valve B
8. Over drive (O/D) brake apply
tube
S6JB0A5106052
Automatic Transmission/Transaxle:
13
9. Solenoid clamp
10. Solenoid clamp bolt
11. Shift solenoid bolt
12. Detent spring bolt
1) Measure inside diameter of transmission case
bushing. If inside diameter exceeds limit, replace
transmission case.
Transmission case bushing inside diameter
standard
38.113 – 38.138 mm (1.5005 – 1.5015 in.)
S6JB0A5106051
(a)
11
10 (a)
7
9
2
3
I5JB0A510127-01
13. Valve body assembly
: 5.5 N⋅m (0.55 kgf-m, 4.0 lb-ft)
I5JB0A510129-01
5A-132