Fuel Lines Inspection; Fuel Pipe Removal And Installation - Suzuki Grand Vitara 2011 Manual

Fuel Lines Inspection

CAUTION
!
Due to the fact that fuel feed line is under
high pressure, use special care when
servicing it.
Visually inspect fuel lines for evidence of fuel leakage,
hose crack and deterioration or damage.
Make sure all clamps are secure.
Replace parts as needed.
Fuel System: For Diesel Engine Model 1G-34

Fuel Pipe Removal and Installation

S6JB0A1726004
WARNING
!
Before servicing fuel system, be sure to
observe "Precautions on Fuel System
Service: For Diesel Engine Model".
Removal
1) Disconnect negative (–) cable at battery.
2) Disconnect fuel pipe joint and fuel hose (1) from fuel
pipe (2) at the front and rear of each fuel pipe
referring to "Fuel Hose Disconnecting and
Reconnecting: For Diesel Engine Model".
3) Mark the location of clamps (3) and (4) on fuel pipes
(2), so that the clamps can be reinstalled to where
they were.
4) Remove pipes (2) with clamp (3) and (4) from
vehicle.
5) Remove clamp (3) and (4) from pipes (2).
I4RH0A170005-01
[A]: 5 door model
Installation
1) Install clamps to painted white location pipes. If
clamp is deformed, its claw is bent or broken,
replace it with new one.
2) Install pipes with pipe clamps to vehicle.
3) Connect fuel hoses and pipes to each pipe referring
to "Fuel Hose Disconnecting and Reconnecting: For
Diesel Engine Model".
4) Connect negative (–) cable at battery.
5) Check fuel leakage referring to "Fuel Leakage Check
Procedure: For Diesel Engine Model".
[B]: 3 door model A: Vehicle forward
S6JB0A1726005
I6JB0A172003-01