Suzuki Grand Vitara 2011 Manual page 1437

Reassembly
1) Clean all components thoroughly, inspect them for
any abnormality and replace with new one as
necessary.
2) Drive in countershaft 5th gear (1) to countershaft (2)
facing its long flange (3) side downward in figure
using bearing puller, special tools and hydraulic
press.
Special tool
(A): 09913–75510
(B): 09924–07710
(B)
1
3) Install circlip to countershaft using snap ring pliers.
4) Drive in countershaft rear bearing (1) using bearing
puller, special tool and hydraulic press.
Special tool
(A): 09913–76010
(A)
Manual Transmission/Transaxle: For Diesel Engine Model 5B-68
(A)
1
3
2
I5JB0B520088-03
1
I5JB0B520089-01
5) Drive in countershaft 3rd gear (1) to countershaft (2)
facing its long flange (3) side downward in figure
using bearing puller, special tool and hydraulic
press.
Special tool
(A): 09924–74590
2
1
6) Drive in countershaft high speed gear spacer (1) to
countershaft (2) using bearing puller, special tool and
hydraulic press.
Special tool
(A): 09913–85210
(A)
(A)
1
3
I5JB0B520090-03
1
2
I5JB0B520091-01