Oil Pump Disassembly And Assembly - Suzuki Grand Vitara 2011 Manual

Oil Pump Disassembly and Assembly

Disassembly
1) Remove 6 bolts, oil pump cover (1), drive gear and
driven gear in that order.
2) Remove oil pump cover O-ring.
3) Remove oil pump body oil seal (1) using special tool.
Special tool
(A): 09913–50121
(A)
Assembly
S6JB0A5106031
Assemble each component by reversing removal
procedure and noting the following points.
• Before installing inner gear and outer gear to pump
body, apply A/T fluid to them.
• Install oil pump seal using special tool.
Special tool
(A): 09913–85210
1
I5JB0A510091-01
• When installing pump cover, use care so that its
splined part will not cause damage to oil seal and use
specified torque to tighten it to pump body.
1
Tightening torque
Oil pump bolt (a): 7.5 N·m (0.75 kgf-m, 5.5 lb-ft)
I5JB0A510093-01
• When installing O-ring and oil seal, apply enough A/T
fluid to them and fit them securely in groove.
• After installation, check that inner gear turns smoothly
by making use of torque converter.
• When installing seal ring, it should not be opened
more than necessary.
• Fit claws of seal ring securely.
Automatic Transmission/Transaxle: 5A-110
(A)
I5JB0A510092-01
IYSQ01510114-01