Starting Motor Inspection - Suzuki Grand Vitara 2011 Manual

4) Install spring (5) and magnetic switch (2) to plunger
and then tighten magnetic switch inner screw (4).
CAUTION
!
With marks (1) on magnetic switch (2) and
planetary carrier shaft assembly (3) marked
before remove aligned to each other.
1
2
4
5) Install front housing (2) and then tighten magnetic
switch screw (1).
1
2
6) Install through bolts (2) and then tighten through
bolts.
7) Connect lead wire to terminal "M" (1).
2

Starting Motor Inspection

Plunger
Inspect plunger for wear. Replace if necessary.
3
5
Magnetic Switch
Push in plunger and release it. The plunger should
4
return quickly to its original position. Replace if
necessary.
I5JB0B190010-01
I5JB0B190009-01
Pull-in coil open circuit test
Check for continuity across magnetic switch "S" terminal
and "M" terminal. If no continuity exists, coil is open and
should be replaced.
1
I5JB0B190017-02
Starting System: For Diesel Engine Model 1I-17
S6JB0A1926004
I5JB0B190018-01
I5JB0B190019-01
I5JB0B190020-02