Generator Components - Suzuki Grand Vitara 2011 Manual

Dismounting
1) Disconnect negative cable (1).
2) Disconnect positive cable (2).
3) Remove retainer (3).
4) Remove battery (4).
Remounting
1) Reverse removal procedure.
2) Torque battery cables to specification.
NOTE
Check to be sure that ground cable has
enough clearance to hood panel by terminal.
Tightening torque
Battery ground bolt (a): 12 N·m (1.2 kgf-m, 9.0
lb-ft)

Generator Components

1
2
5
1. Pulley
2. Drive end frame
3. Drive end bearing
3
8
6
9
(c)
4. Bearing retainer 7. Coil assembly
5. Rotor assembly 8. Insulator
6. Wave washer 9. Through bolt
Charging System: For Diesel Engine Model 1J-23
(a)
3
4
(a)
(b)
7
10. Brush holder assembly
11. Rear end cover
12. Rear end cover nut
2
1
4
I5JB0B1A0006-01
S6JB0A1A26004
11
10
(d)
12
I5JB0B1A0007-01