Wrinkling - Xerox Phaser 8400 Service Manual

Wrinkling

Step Question and Actions
1 Use media from the approved media list.
2 Try flipping the media over or using a heavier weight.
3
Try different media from a sealed package. In high-humidity environments, paper left
exposed (unpacked) absorbs moisture and begins to warp.
4 Increase the margin size of the image, if feasible. Wrinkling generally occurs in solid
fills near the print's edge.
5 Inspect the maintenance kit wiper blade. If necessary, replace the maintenance kit.
6 Replace the transfix roller, transfix cam, transfix load arm, and transfix load module.
5-22
The print is usually damaged in a corner
with solid fills. This problem is more
often seen on short-grain media. Some
wrinkling on envelopes flaps is an
acceptable limitation of this printer. You
may see wrinkling on the second side of
a 2-sided print on the secondary colors.
An underline under the dimension
indicates the direction of the grain.
0388-74
Phaser 8400 Color Printer