Table of Contents
Advertisement
Xerox Nuvera EA/MX Production System
Paper Tray Programming
When you load paper in a paper tray, you must program the tray for the paper it contains.
To avoid loading a paper stock unsupported by the machine, see
Recommendations for Paper
Usage.
For details on paper handling and storage, see
Handling and Storing
Paper.
For details on loading special papers, see
Loading Special Stock for Proper Finishing
Output.
Caution
Paper trays do not lock and can be opened while paper is being fed from the tray, resulting in misfeeds
and/or paper jams. Wait for the LED light on the tray to turn OFF before opening the tray.
Solving Image Quality Problems
The Xerox Nuvera is capable of reproducing and generating high-quality images.
However, image defects may occur. These image quality problems are usually attributed to a defective
original, or the user applying too much, too little, or the wrong type of image quality control.
Contacting Xerox
Before contacting Xerox for a service problem, perform the following steps:
• For image quality problems, first attempt to resolve the problem using the
image quality
troubleshooter.
• For worn out customer replaceable units, first attempt to
replace the component
yourself.
Sheet Feed Modules (SFM)
The Sheet Feed Modules hold your paper and feed the appropriate stock for the current job settings.
The Xerox Nuvera System can be configured with a 4-Tray Feed Module or a 2-Tray Feed Module. Your
system can include up to two SFMs in any combination of 4-Tray or 2-Tray.
The 2-Tray Feed Module has two large format large capacity trays. These trays are similar to the 4-Tray
Feed Module but with a larger capacity, holding up to 1,600 sheets. Refer to the Feed Module
Specifications.
The 4-Tray and the 2-Tray Feed Modules can be used as post fuser Insertion Modules.
The SFMs support automatic tray switching and the ability to load while printing.
For details about the 4-Tray Sheet Feed Module and its trays, capacities, features and functions, browse
the links below. The links are grouped according to the numbered areas in the diagram.
6-6
Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
Advertisement
Table of Contents
