Table of Contents
Advertisement
TYPICAL COMPONENT PLACEMENT AND MOUNTING ILLUSTRATION OF THE ULTRA WHISPER
MODULAR STYLE SYSTEM: SHOWN WITH ALL OPTIONAL ACCESSORIES.
[33 & 34]
[35]
[36 & 37]
[4]
E. ULTRA WHISPER MODULAR SYSTEM & COMPONENT MOUNTING: The following steps discuss the placement
and mounting of the various Ultra Whisper Modular Style system components. The illustration on the previous page
shows the Ultra Whisper Modular Style System with and without options. If an Optional Accessory is not included
ignore the respective step and move to the next.
CAUTION: Mounting surfaces must be flat in order to avoid warping of brackets and frames. Use appropriate
shims on uneven surfaces to ensure that mounting of the system components does not cause bending or warping,
and subsequent leaking or breakage. Damage to any system component due to attachment to uneven surfaces is
the responsibility and liability of the installer and is not covered by the Sea Recovery warranty.
ATTACHMENT: All individual components are supplied with common mounting hardware. Some installations
may require different hardware than what has been supplied.
SUPPLIED HOSE AND TUB LENGTHS: When planning out the location and mounting of the System and related
components give consideration to the length of hose and tube supplied with the system.
[7]
[12]
[6]
[1, 2, & 3]
Section 2 Page 55 of 68
[5, 9, 10, & 11]
[13]
[17]
Sea Recovery Ultra Whisper v3.0 June 2008
[28]
[29]
[20]
[30]
[22]
Advertisement
Table of Contents
