Sea Recovery SRC Ultra Whisper Compact 200 Owner's Manual page 54

STEP 2 OPTIONAL COMPONENT MOUNTING
1. If installed, the Plankton Filter (page 9.20) [5]
should be mounted inline between the Feed Pump
[4] or Fresh Water Flush [25] and the Pre-filter
Assembly.
2. Mount the Fresh Water Flush Filter & Boost
Pump (page 9.16) [24] to a Vertical Bulkhead.
Allow at least three inches of clearance below for
element replacement.
3. Mount the Fresh Water Flush Check Valve
Assembly (page 9.16) [25] vertically in close
2
Ultra Whisper Modular Optional Component Mounting
3
1
5
Section 2 Page 15 of 68
Sea Recovery Ultra Whisper Rev. A
proximity to the Feed Pump [4] and Fresh Water
Flush Filter Canister [24] as shown below.
4. If installed, Mount the Charcoal Filter (page 9.14)
[21] to a bulkhead using the supplied #10 x 1"
Type "A" screws. Mount the UV Sterilizer (page
9.15) [22] to a bulkhead directly after the
Charcoal Filter.
5. The UV should be mounted vertically with the
electrical fitting on the top. The UV should be
plumbed with the inlet on the bottom and the
outlet on top.
4