Sea Recovery SRC Ultra Whisper Compact 200 Owner's Manual page 28

Sea Recovery Ultra Whisper Rev. A
1. INTRODUCTION
COMPONENT DESCRIPTIONS
All components supplied by Sea Recovery, both
standard and optional, are described in this section
along with items required or desired by the installer.
The location, operation, and purpose of each major
component is briefly explained in this section.
The descriptions in this chapter are listed according to
the ID numbers each component is given in the System
Piping and Interconnect Diagram illustrated on the
following page.
Through out this manual, components are followed by
a number in brackets i.e., "Sea Strainer [4]", which
refers to the component's location in the illustration on
the following page, the P&ID (Piping & Interconnect
Diagram).
** Denotes items supplied by installer
*** Denotes optional equipment.
Through out this Owners Manual cautions are given
to the technician, operator, and owner to ensure that
you use only Sea Recovery supplied components,
consumables, spares, and replacement parts. Since
1981 Sea Recovery has shipped over 12,000 R.O.
Systems and most of them are still in use today. Of all
the reported problems that we help our customers with
the majority are problems caused by using third party
replacement parts and consumables. Use of third
party, Non Sea Recovery, components will lead to
premature failure, added operating costs, added
maintenance costs and labor, and will void any and all
Sea Recovery Warranty. We only wish to help you
enjoy the luxury of owning a Sea Recovery R.O.
System.
Section 1 Page 5 of 16