Sea Recovery SRC Ultra Whisper Compact 200 Owner's Manual page 205

Procedure to Continue resurfacing the Control Sliding Panel
NOTE: Empty the water in the ETD before disassembling it.
1. Loosen both elbows (Item #26) that hold both
blue polyamide tubes (Item #48) to be able to
undo the union between these two elements.
2. Remove the seven allen screws M6 x 12 mm(Element #31)
that attach the spacer (Item #14)
as it appears in the figure.
3. Remove the Sliding Control Panel from its housing.
It simply pulls out.
section 7 page 20 of 39
Sea Recovery Ultra Whisper Rev. A
33
31
48
26
14