PREFILTER INLET
PRESSURE LINE
Figure 2.2.5 Illustration of the 1/4" black tube connections to sub-assemblies on a Modular System.
PRODUCT LINES - 1/4" BLACK TUBE
Use the 1/4" black tube to connect the tube connection on
the back of the Product Manifold to the tube connection
on the Membrane Vessel Assembly. Use the 1/4" black
tube to connect the tube connection on top of the Product
PREFILTER INLET
PRESSURE LINE
HIGH
PRESSURE
SWITCH
REJECT LINE
3-W AY VALVE
M EM BRANE OUTLET PRODUCT W ATER LINE
Section 2 Page 23 of 68
Sea Recovery Ultra Whisper Rev. A
THREE PLACES
CONNENT PRESSURE LINE
TO 1/ 4" TUBE FITTING
BEHIND PRESSURE GAUGE
Manifold to the tube connection on the Boat's Product
Tank.
REJECT LINES - 1/4" BLACK TUBE
Use the 1/4" black tube to connect the tube connection on
the side of the Product Manifold to the tube connection
on the Reject Water Assembly.