Sea Recovery SRC Ultra Whisper Compact 200 Owner's Manual page 67

Sea Recovery Ultra Whisper Rev. A
CONNECT TO
THRU HULL
INLET
FITTING
FEED W ATER
INLET
CONNECT 1/ 4" BLACK TUBE
TO FITTING ON BACK
OF VACUUM GAUGE
1/ 4" PRODUCT OUTLET
1/ 4" REJECT LINE
PRESSURE LINE - 1/4" BLACK TUBE
Use the 1/4" black tube to connect the tube connection
on the Feed Pump to the tube connection behind the
Vacuum Gauge on the Compact Frame Assembly.
PRODUCT LINE - 1/4" BLACK TUBE
PRODUCT
TANK
3-W AY VALVE
REJECT LINE
Figure 2.2.10 Illustration of the 1/4" black tube connections
Section 2 Page 28 of 68
CONNECT TO
THRU HULL
DISCHARGE
FITTING
Use the 1/4" black tube to connect the tube connection
on top of the Product Manifold to the tube connection
on the Boat's Product Tank.
REJECT LINE - 1/4" BLACK TUBE
Use the 1/4" black tube to connect the tube connection
on the side of the Product Manifold to the tube
connection on the Reject Water Assembly.