Sea Recovery SRC Ultra Whisper Compact 200 Owner's Manual page 59

Sea Recovery Ultra Whisper Rev. A
FEED WATER 5/8" HOSE LINE
Use the 5/8" braided hose to Connect the 1/2" hose barb
on the 3/4" Inlet Elbow Assembly to the Sea Strainer
Inlet. Always use two 3/4" hose clamps when
assembling the 5/8" braided hose. Connect the Outlet
of the Sea Strainer to the Feed Pump Inlet. Connect
the Feed Pump Outlet to the Inline Tee Assembly then
to the Pre-filter Inlet. Connect the Accumulator Outlet
CONNECT TO
THRU HULL
INLET
FITTING
FEED W ATER
INLET
to the other Inline Tee Assembly then to the Inlet of
the ETD labeled "E".
Section 2 Page 20 of 68
CONNECT TO
THRU HULL
DISCHARGE
FITTING