Sea Recovery SRC Ultra Whisper Compact 200 Owner's Manual page 61

Sea Recovery Ultra Whisper Rev. A
PREFILTER INLET
PRESSURE LINE
Figure 2.2.4 Illustration of the 1/4" black tube connections on a Modular System.
PRESSURE LINES - 1/4" BLACK TUBE
Use the 1/4" black tube to connect the tube connection
on the Feed Pump to the Vacuum Gauge on the Pre-
filter Assembly.
Use the 1/4" black tube to connect the tube connection
on the first Inline Tee Assembly to the tube connection
on the high-pressure switch manifold on the Pre-filter
PREFILTER INLET
PRESSURE LINE
HIGH
PRESSURE
SWITCH
REJECT LINE 3-W AY VALVE
M EM BRANE OUTLET PRODUCT W ATER LINE
Section 2 Page 22 of 68
THREE PLACES
CONNENT PRESSURE LINE
TO 1/ 4" TUBE FITTING
BEHIND PRESSURE GAUGE
Assembly then use the other tube connection to connect
to the Inlet Pre-filter Pressure Gauge on the Front
Panel Assembly.
Use the 1/4" black tube to connect the tube connection
on the second Inline Tee Assembly to the tube
connection behind the Outlet Pre-filter Pressure Gauge
on the Front Panel Assembly.