Sea Recovery SRC Ultra Whisper Compact 200 Owner's Manual page 69

Sea Recovery Ultra Whisper Rev. A
FEED W ATER
INLET
Connect main power to the assigned terminal block in
Chapter 7. The main power cable is inserted through a
large Strain Relief on the bottom of the controller
enclosure.
Connect the Feed Pump motor power through the other
large Strain Relief on the bottom of the controller
Figure 2.2.12 Illustration of the Compact electrical connections
Section 2 Page 30 of 68
enclosure to assigned terminal blocks as indicated in
Chapter 7.
AC Systems only- Connect the boat's 12 VDC power
source through the small Strain Relief under the
controller enclosure and to the fuse terminals below the
terminal block assembly.