Mitsubishi Electric C70 Setup Manual page 367

MITSUBISHI CNC
Appendix 1 Explanation of Parameters
<53rd, 54th word: Log information area>
Cyclic CBN error count:
Indicates the accumulated count of CBN (block No.) error detection in the cyclic frame.
<55th, 56th word: Log information area>
Cyclic TBN error count:
Indicates the accumulated count of TBN (total block No.) error detection in the cyclic frame.
<57th, 58th word: Log information area>
Cyclic BSIZE error count:
Indicates the accumulated count of BSIZE (data size including frame header) error in the cyclic
frame.
<73rd, 74th word: Log information area>
Message transmission resend count:
Indicates the accumulated count of resends in the message frame.
<75th, 76th word: Log information area>
Message transmission resend over count:
Indicates the accumulated count of resend over in the message frame.
<87th, 88th word: Log information area>
Message transmission receive error count:
Indicates the accumulated count of message frame receive error detection.
<89th, 90th word: Log information area>
Message transmission communication No. error count:
Indicates the accumulated count of communication No. error detection in the message frame.
<91st, 92nd word: Log information area>
Message transmission resend recognition count:
Indicates the accumulated count of resend recognition in the message frame.
<97th, 98th word: Log information area>
ACK error count:
Indicates the accumulated count of ACK header error detection.
<99th, 100th word: Log information area>
Serial No. version error count:
Indicates the accumulated count of serial No. version error detection (mis-match detection).
<101st, 102nd word: Log information area>
Serial No. error count:
Indicates the accumulated count of serial No. error detection (non-continuous detection).
<103rd, 104th word: Log information area>
Node No. error count:
Indicates the accumulated count of node No. error detection.
<105th, 106th word: Log information area>
TCD error count:
Indicates the accumulated count of TCD (transaction code) error detection.
<121st, 122nd word: Log information area>
Token multiplexing recognition count:
Indicates the accumulated count of optional node address (including local node address) tokens
detected while the token is being held.
<123rd, 124th word: Log information area>
Token destruction count:
Indicates the accumulated count of node address tokens having a value that is less than that of
local node while the token is being held.
<125th, 126th word: Log information area>
Token resend count:
Indicates the accumulated count of token resends.
<133rd, 134th word: Log information area>
Token holding time-out count:
Indicates the accumulated count of time-out detections for token holding time-out time (value that
does not exceed the token monitoring time-out time.)
350