Mitsubishi Electric C70 Setup Manual page 56

<Setting system environment separately by GT Designer2>
This is how to set without "New Project Wizard".
(1) Start GT Designer2. Select "New". Or open the project which is already created. The "System Environment"-
"System Settings" dialog box will appear.
(2) Select the following items from among the pull-down menu, and click "OK".
GOT type: Select the model name of the GOT to use ("GT15**-...")
Controller type: MELSEC-QnU, Q17nD/M/NC/DR, CRnD-700
A dialog box appears to confirm the communication setting. Click "Yes".
C70 Setup Manual
2.2 GT Designer2
39