Mitsubishi Electric C70 Setup Manual page 206

【#1120(PR)】 TofVal Change macro variable
Select whether to change the macro variable (tool offset) numbers for shape compensation and
wear compensation.
0: Not change (Conventional specification)
1: Change the shape and wear compensation variable numbers each for X, Z, and R
【#1121】 edlk_c Edit lock C
Select the edit lock for program Nos. 9000 to 9999 in memory.
0: Editing possible
1: Editing prohibited. The file cannot be opened.
(Note) If "#1122" is set to "1" or "2", "1" will be set in "#1121" when the power is turned ON.
【#1122(PR)】 pglk_c Program display lock C
Select whether to prohibit the program display and search for program Nos. 9000 to 9999 in
memory.
0: Program display and search is possible
1: Program display is impossible. Search is possible.
2: Program display and search is impossible
The program details will not be displayed‚ but the program No. and sequence No. will display in the
prohibited state.
(Note) If "#1122" is set to "1" or "2", "1" will be set in "#1121" when the power is turned ON.
【#1123】 origin Origin zero prohibit
Select whether to use the origin zero function.
0: Use
1: Not use
【#1124】 ofsfix Fix tool compensation No.
Select how to handle the compensation No. when the input key is pressed on the tool compensation
screen.
0: Increment the compensation No. by 1 (Same as general parameters)
1: # compensation No. does not change
When setting in sequence, "0" is handier. When changing and setting repeatedly while adjusting one
compensation value, "1" is handier
【#1125】 real_f Actual feedrate display
Select the feedrate display on the monitor screen.
0: Command speed
1: Actual travel feedrate
【#1126】 PB_G90
Not used. Set to "0".
【#1127】 DPRINT DPRINT alignment
Select the alignment for printing out with the DPRINT function.
0: No alignment, output s printed with left justification
1: Align the minimum digit and output
【#1128】 RstVCI Clear variables by resetting
Select how to handle the common variables when resetting.
0: Common variables won't change after resetting.
1: The following common variables will be cleared by resetting:
#100 to #149 when 100 sets of variables are provided.
#100 to #199 when 200 sets or more of variables are provided.
Appendix 1.3 Base Specifications Parameters
C70 Setup Manual
189