Appendix 3.2 Alarm/Stop Codes; Appendix 3.2.1 Detailed Display Of Alarm/Stop Codes - Mitsubishi Electric C70 Setup Manual

MITSUBISHI CNC
Appendix 3 Display on 7-segment LED

Appendix 3.2 Alarm/Stop codes

Appendix 3.2.1 Detailed display of alarm/stop codes

An alarm/stop code occurrence is displayed in 2 steps, report and details .
Alarm ("AL") or stop code ("STP") display flickers 3 times.
Details: Alarm code is displayed in 3 phases.
Normal state
When multi-part system is used, the part system No. shows first, and then the alarm code appears.
When an alarm (stop code) occurred
594
When an alarm (stop code) occurred
Alarm type
Status 1
Status 2
Flickers 3 times
No alarm in the 1st part
system
Indicates the alarm display
for the 1st part system
Displays the alarm code in
3 phases
(Ex) M01 OPERATION ERROR
0006 XYZ
Flickers 3 times
Alarm code is displayed in 3 phases
(Ex) Z53 TEMP. OVER 0003
No alarm in the 7th part
system
Indicates the alarm display
for the 7th part system
Displays the alarm code in
3 phases