Setting The Module Name - Mitsubishi Electric C70 Setup Manual

MITSUBISHI CNC
5 Connecting and Setting up Multiple CNC CPU Modules

5.6 Setting the Module Name

To recognize which CNC CPU is set in the CNC monitor, each CNC CPU module needs to be named with the following
parameter.
#1135 unt_nm: Set a module name.
Set up the module name with 4 or less characters consisting of both alphabets and numbers.
If "0" is set, the module name is not displayed.
(Example)Setting the 1st CNC CPU as "M01" and the 2nd CNC CPU as "M02"
(1) In the CNC monitor screen for the 1st CNC CPU, set "M01" in the base specification parameter "#1135
unit_nm".
(2) Select "CNC Chg". In the CNC monitor screen for the 2nd CNC CPU, set "M02" in the base specification
parameter "#1135 unit_nm".
96
M EL S E C M EL S E C M EL S E C M EL S E C
POWER POWER POWER POWER
MITSUBISHI MITSUBISHI MITSUBISHI MITSUBISHI
CPU#2 CPU#3
Unit name
M01
Unit name
M02