Setting The Connection To Gx Works2 - Mitsubishi Electric C70 Setup Manual

3.1.2 Setting the Connection to GX Works2

In order to setup GX Works2 and PLC CPU, it is necessary to open a project on GX Works2.
(1) Turn ON the PLC CPU. Start GX Works2, and select [New project] from the [Project] menu. If a project is already
created, open it. ([Project]-->[Open project])
(2) If "New project" is selected, the "New project" dialogue box will appear. In "PLC series", select "QCPU (Qmode)",
and in "PLC Type", select the PLC CPU type to connect. Click "OK".
(3) Select "Connection Destination" on the navigation window and then double click "Connection1" in "Current
Connection".
C70 Setup Manual
3.1 GX Works2
59