Servo Simplified Adjustment; First Measure Against Vibration - Mitsubishi Electric C70 Setup Manual

6.8 Servo Simplified Adjustment

6.8.1 First Measure Against Vibration

Vibration may occur when CNC is turned ON after setting parameters.
Setting the filter can reduce the vibration.
(1) Select [ALARM/DIAGN] --> [SERVO] on the CNC monitor screen.
(2) Touch the page scroll key and confirm the displayed value of the "AFLT FREQUENCY".
(Note)
(3) Display [SERVO PARAM] screen from [TOOL PARAM] and input the "AFLT FREQUENCY" value, which is
confirmed in the step (2), to "#2238 SV038 FHz1 (Notch filter frequency 1)".
(Note)
This screen display is for when NC parameters have default value.
This screen display is for when NC parameters have default value.
C70 Setup Manual
6.8 Servo Simplified Adjustment
111