Show System Tcam Utilization - Cisco SPS2024 Reference Manual

System Management Commands

show system tcam utilization

show system tcam utilization
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The show system tcam Privileged EXEC mode command displays the Ternary
Content Addressable Memory (TCAM) utilization.
Syntax
show system tcam utilization [unit
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information on features control.
Console> show system tcam utilization
TCAM utilization: 58%
unit ]
31
455