Cisco SPS2024 Reference Manual page 340

SNMP Commands
snmp-server group
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Parameters
•
groupname—
Specifies the name of the group (Range: 1-30 characters).
•
v1 — Indicates the SNMP Version 1 security model.
•
v2 — Indicates the SNMP Version 2 security model.
•
v3 — Indicates the SNMP Version 3 security model.
•
noauth — Indicates no authentication of a packet. Applicable only to the
SNMP Version 3 security model.
•
auth — Indicates authentication of a packet without encrypting it.
Applicable only to the SNMP Version 3 security model.
•
priv — Indicates authentication of a packet with encryption. Applicable only
to the SNMP Version 3 security model.
•
name
— Specifies the context of a packet. The following context is
supported: Router. If the context name is unspecified, all contexts are
defined.
•
notifyview
— Specifies a string that is the name of the view that enables
specifying an inform or a trap. If unspecified, nothing is defined for the notify
view. Applicable only to the SNMP Version 3 security model.
•
readview
— Specifies a string that is the name of the view that enables only
viewing the contents of the agent. If unspecified, all objects except for the
community-table and SNMPv3 user and access tables are available.
•
writeview
— Specifies a string that is the name of the view that enables
entering data and configuring the contents of the agent. If unspecified,
nothing is defined for the write view.
Default Configuration
No group entry exists.
Command Mode
Global Configuration mode
26
338