Show System Verify - Cisco ASR 9000 Series Command Reference Manual

Tech-Support Commands

show system verify

To verify the system parameters, use the show system verifycommand in EXEC mode.
show system verify [start| report| detail]
Syntax Description
start
detail
report
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
You must run the show system verify command with the start keyword before generating any reports.
Task ID
Task ID
system
Examples The following example shows how to prepare for system verification:
RP/0/RSP0/CPU0:router# show system verify start
Storing initial router status ...
done.
(Optional) Performs an initial analysis of the system and stores the information
for subsequent verification.
(Optional) Generates a detailed report for the system verification process.
(Optional) Generates a report for the system verification process.
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
Modification
This command was introduced.
Operations
read
show system verify
47