Chapter 12: Ethernet Configuration Commands; Interface Ethernet - Cisco SPS2024 Reference Manual

Ethernet Configuration Commands

interface ethernet

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The interface ethernet Global Configuration mode command enters the interface
configuration mode to configure an Ethernet type interface.
Syntax
interface
interface ethernet
Parameters
•
interface
— Valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables configuring Ethernet port e18.
Console(config)# interface ethernet e18
12
150