Sntp Authentication-Key - Cisco SPS2024 Reference Manual

Clock Commands

sntp authentication-key

sntp authentication-key
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
USA rule for daylight savings time:
•
Start: Second Sunday in March
•
End: First Sunday in November
•
Time: 2 am local time
EU rule for daylight savings time:
•
Start: Last Sunday in March
•
End: Last Sunday in October
•
Time: 1.00 am (01:00)
Example
The following example sets summer time starting on the first Sunday in April at 2
am and finishing on the last Sunday in October at 2 am.
Console(config)# clock summer-time recurring first sun apr 2:00
last sun oct 2:00
The sntp authentication-key Global Configuration mode command defines an
authentication key for Simple Network Time Protocol (SNTP). Use the no form of
this command to remove the authentication key for SNTP.
Syntax
sntp authentication-key
no sntp authentication-key
Parameters
•
number —
Key number (Range: 1-4294967295)
•
value —
Key value (Range: 1-8 characters)
number value
md5
number
6
105