RADIUS Commands
show radius-servers
show radius-servers
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The show radius-servers Privileged EXEC mode command displays the RADIUS
server settings.
Syntax
show radius-servers
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays RADIUS server settings.
Console# show radius-servers
IP address Port TimeOut RetransmitDeadTimeSource IPPriority Usage
Auth
---------- ---- ------- ----------------- --------- -------- -----
172.16.1.1 1645 Global Global
172.16.1.2 1645 11
Global values
-------------
TimeOut: 3
Retransmit: 3
Deadtime: 0
Source IP: 172.16.8.1
Global
8
Global
24
-
1
Global
2
All
All
313