IP Source Guard Commands
ip source-guard binding
ip source-guard binding
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The ip source-guard binding Global Configuration mode command configures the
static IP source bindings on the switch. Use the no form of this command to delete
static bindings.
Syntax
ip source-guard binding
port-channel-number
channel
no ip source-guard binding
Parameters
•
mac-address
— Specifies a MAC address.
•
vlan-id
— Specifies a VLAN number.
•
ip-address
— Specifies an IP address.
•
interface
— Specifies an Ethernet port.
•
port-channel-number —
Default Configuration
No static binding exists.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
mac-address vlan-id ip-address
}
mac-address vlan-id
Specifies the Port-channel number.
16
interface
{ethernet
| port-
228